Machine Details

ICLES-MT30 Underground Dump Truck

.

ICLES-MT30 Underground Dump Truck

Mine transport vehicle precautions

1. It is forbidden for anyone to lift the upper and lower excavators and deliver articles during the operation. It is not allowed to maintain while working; do not adjust the engine and hydraulic system and electric control system at will; pay attention to selecting and creating a reasonable working surface.

2. When the material is unloaded, it should be stopped after the vehicle is stopped; when the material is not hitting any part of the dump truck, the height of the bucket should be lowered; the bucket is crossed from the top of the dump truck.

3. It is forbidden to use a bucket to crush a solid object; if it encounters a large stone or a hard object, it should be removed first and then continue to work; it is forbidden to excavate the rock of level 5 or above.

4. In the process of agricultural operation and operation, it is necessary to check whether the temperature of the hydraulic oil is normal.

5, four is not like the car in the operation of the wire, crossroads, bridges and culverts, understand the situation and then pass, if necessary, set a special person command; the distance between the excavator and the high-voltage wire should not be lessthan 5m; should avoid walking backwards as much as possible.

30-35吨矿车 (7).jpg30-35吨矿车 (3).jpg30-35吨矿车 (2).jpg30-35吨矿车 (5).jpg

NameMine dump truck
Dimensions7300*2500*2750mm
Rated load30000kg
Minimum ground clearance280mm
Carriage steel plate thicknessBottom 16mm, side 10mm
Loading height2650mm
Maximum height of machine when unloading5900mm
Minimum turning radius (outside)10000mm
Engine brandYuchai
Engine Rated power/speed250kW/ 2200r/min
Tire10.00R20/18PR
Steering methodHydraulic steering machine
Intake air purificationDual-stage filter air filter
Exhaust gas purificationThree-way catalytic converter + water filtration

Advantages of 4 wheel dump truck:

1. Improved design of main structure like two and half beam to assure large load and security;

2. Improved design of power supply and distribution system to achieve lower fuel consumption and more driving force;

3. Best diesel engine and battery group supplier to assure a robost performance;

4. Clutch lock is used for Rear axle and no resistance gear makes it easy to operate;

5. Large capacity is put to use for fuel tank, driving mileage is long;

6. Electrophoretic coating process is used for the vehicle cover panel. Corrosion and aging resistance, non-fading.

矿车产品细节 (1).jpg

Product Details

1. When the temperature is lower than 5 °C, the start of the engine is more difficult. At this time, the engine needs to be started with some auxiliary mechanical skills. For example, the engine can be heated or steam preheated before starting, and the temperature reaches 30 °C- Restart at 40 °C or above (the diesel engine is generally compression-ignition type, it is necessary to preheat the cylinder temperature and heat the temperature of the misty diesel).

2. The engine start recommendation should not exceed 15 seconds at a time. If it cannot be started, the start switch should be released. After stopping for 1 minute, start again. After starting, you need to idle for a period of time before starting to drive. Note that the idle time should not be exceeded. Long (3-5 minutes), too long, it is easy to form carbon deposits on the inner wall of the cylinder, and there is a phenomenon of pulling the cylinder. One idling can charge the battery, and the other will bring the water temperature to 55 °C and the brake pressure to 0.4 MPa or more.

3. When the water temperature of the diesel engine is higher than 55 °C and the oil temperature is higher than 45 °C, the whole machine can enter the full load operation state. When the mining four-wheeled vehicle works normally, the water temperature and oil temperature of the engine should not exceed 95 °C. The oil temperature of the tank should not exceed 110 °C.

4. When the temperature is lower than 0 °C, the mining four-wheeled vehicle will stop the cooling water in the water tank, engine, oil cooler and torque converter oil cooler to avoid freezing the body; the air reservoir should be drained frequently. To prevent icing, resulting in brake failure.

5. If the mining four-wheeled vehicle has not been used for more than half a month, the engine must be started once every 15 days and run for a period of time to charge the battery; if the shutdown time exceeds one month, please remove the battery and charge it with a charger. It is necessary to properly move the mining four-wheeled vehicle to change the pressure-receiving part of the tire to prevent the tire from being deformed; if the vehicle needs to be parked for more than two months, the battery negative pole must be disconnected or removed.

6. The fuel used in winter diesel engines should be -10# light diesel oil. In cold regions, the fuel should be -35# light diesel oil, and the engine oil of diesel engine should be CF grade.

7. When the temperature is below 0 °C, the antifreeze concentration should be checked regularly, and untreated water is prohibited as the engine coolant.

矿车产品细节 (2).jpg矿车产品细节 (3).jpg矿车产品细节 (4).jpg

Application

(1)Diesel dumper truck is widely used in off-highway outdoor sites, such as large open pit mines, water conservancy projects, Dump Trucks for transporting coal mines, metal mines and sandstones. It is often combined with excavators, loaders and other construction machinery to finish the loading, unloading and the complete transportation working lines.

(2)Diesel dumper truck is the perfect choice for underground Mining transportation. It has been expertly designed for reliable and durable in small-to-medium mining and construction operations. It has good performance for extreme environment and narrow space,with loading capacities from 1 tonnes to 10 tonnes.

(3)Diesel dumper truck is suitable for underground roadway mine, iron ore mine and rare metal mine.

***Friendly Reminder***

1.After 50 hours of operation, replace the vehicle oil (oil, transmission oil, rear axle gear oil).

2.Often check the half shaft, drive shaft, direction machine, steel plate clip, diesel engine foot and other connection screws, the new car must check the vehicle screws when the first load, tighten the bow board card screws.

3.Often to the active parts of the lubricating oil, cold weather areas should be filled with high grade oil and antifreeze.

4.The air brake type should be maintained at a pressure of more than 4KPA, large load or sharp turns should be used at low speed.

5.This equipment is driven in the mining area or construction area, please do not drive on the road.

6.When using four-wheel drive agricultural vehicles, it is strictly prohibited to kill the direction in place and to use high-speed four-wheel drive.

7.With supercharged engine models, it is strictly prohibited to idle for more than 15 minutes.

8.When the tipping model is jacking up, the operation should be stopped when the last cylinder is out 1/3, so as not to cause cylinder rupture.

矿车应用.jpg

Packaging & Shipping

LCL Delivery:For order one unit or order less container load we adopt standard wooden box packing, to convenient package we only remove the wheels.Other parts do not do any demolition, so when arrive you just need to assemble the wheels then can driving directly.

FCL Delivery:For the order quantities more than 8 units, normally we advise to adopt full container load, full container shipment without any demolition, it‘s more convenient transportation and cost savings.

矿车发货-1 (12).jpg矿车发货-1 (10).jpg

01.Responsibility

Focusing on social responsibility, being accountable to our customers and employees, ICLES Machinery Technology Co., Ltd. aims to be a responsible enterprise. Responsibility is the core belief of our company.

02.Cooperate

ICLES Machinery Technology Co., Ltd. is committed to growing and progressing together with our partners, sharing the fruits of development. Win-win cooperation is the hallmark of our company.

Parameter
  • Model: ICLES-MT30
  • Rated Load: 30000kg
  • Engine Power: 250kW
  • Curb Weight: 15500kg
  • Approach Angle: 25°